Female-Male Fitting
House Connector (KD-W-R)

Connection
Male thread on female thread

Material transition
All

Media
Water

Pressure rating
PN 10 (10 bar)

Temperature medium
KD-W-R: 70°C
KD-HW-R: 95°C on request


Insulation
1500 Volt

Material
Housing and sleeve made of brass (other material on request)

Approval
SVGW/SSIGE and DVGW approved for water

Construction
The two-part insulating fitting consists of an insulating socket and a pipe. The socket consists of a threaded sleeve, which is steady and inseparably linked to the housing. Therefore, it ensures the electrical separation, due to an insulating plastic coating (Hostaform). The brass pipe is surface-coated with an insulating epoxy plastic and lengthens the insulated section up to 500 mm.

Features
500 mm are necessary to provide the required insulation based on the conductivity of the water. Thereby, the demanded resistance (DIN 3389) can be ensured and the insulating joint complies with the guidelines SVGW/SSIGE (W3d), when using in Switzerland.

Custom made
The length can be individually modified. Smooth pipes instead of thread on request.

Übergang Alle = All material transition / Messing = brass

KD-W-R