Solder Connection Copper – High Pressure 40 bar
Laboratory and medical gases / fluids
(KD-RBH-S)

Connection
Solder connection copper

Materiel transition
Copper – copper, brass – brass, copper - brass

Media
Type RB: Laughing gas (N2O), compressed air, vacuum, all fluids that do not damage
                copper and brass, sealings made of NBR (trade name: Buna-N)

Pressure rating
PN 40 (40 bar)

Temperature medium
Type RB: -18°C to +95°C

Insulation
Type RB: 2000 Volt 


Material
Copper / brass

Construction
Type S: straight

The insulator consists of copper pipes on both sides (half hard, 200 mm side length), which is soldered (silver solder) to a solid, two-piece brass housing. Inside, a protected isolator of special plastic electrically separates both elements.

Custom made
Special designs precisely meet your requirements. For instance, individual length, diameter, bending angle, isolation voltage, pipe materials and gases.
Following sealings on request: Kalrez 
(Perfluorelastomer FFKM/FFPM) / EPDM / Viton



Features
Insulations are delivered degreased and closed with plastic plugs.
Supplied with securing nut
.
Manufactured in accordance with EN-Norm.

Application
These products are among other things made for medical gas lines in operation theatres and intensive care units, as well as for shielding cabins.
Low voltage installation standard and Kyburz products: see technical information

.

Kupfer = copper

KD-RBH-S